Full renovation of RC construction│Building an apparel sewing factory in Yamanashi

We would like to introduce the construction of a ``toilet'' at a sewing factory. We will install toilets where there were none. We also requested airtight construction. Even though it's inside the toilet, we chose a number of toolbox products with particular attention to the interior.

This time, we chose multilayer vinyl floor tiles (PVC flooring) considering the design, price (cost performance), and durability. It also describes the process of applying glue and pasting PVC tiles, the type of glue used, and the construction of Toli's soft baseboards.

We will introduce the process of pasting cloth in a sewing factory (corner base reinforcement, top coat putty, gluing to wallpaper (cloth), and pa...

We will introduce the process to be performed ``before'' pasting wallpaper (cloth) over plasterboard and plywood for cloth base. We will show you how to install putty and mesh tape (fiber tape). AGLUCA, an apparel sewing factory operated by Ioku Co., Ltd.

This is an article that introduces the continuation of the sewing factory and flooring (double floor construction method) in the renovated RC building.
We have already completed the installation of particle board on the floor, but here we will show you how to install plywood on top of it.
We will also introduce the construction of galvalume steel plates for exterior wall materials, as well as the construction of plasterboard and plywood for cloth bases.

We will show you how IG Industries Co., Ltd.'s Galvalume steel plate SF-Galspun JF, color F titanium gray metallic ( code: SFJ1-291), is instal...

We will show you how to install gypsum board and plywood for cloth base to make indoor walls. Garment factory AGLUCA purchased a used RC building in Yamanashi and is fully renovating it with the aim of creating a highly airtight and highly insulated factory.

Insulate air conditioner drain pipes and secure ladder-like cable racks hanging from the ceiling and electrical wiring with cable ties. We are fully renovating the RC structure of AGLUCA, an apparel sewing factory in Yamanashi.

We will introduce how to make an RC floor and how to insulate the floor. It seems that the most common method is to install insulation material under the particle board using a method known as a double floor construction method. AGLUCA, an apparel sewing factory in Yamanashi, installed floor insulation using this method.

In order to make the building highly airtight and highly insulated, we will introduce the construction of insulation materials (Styrofoam, Rockwool, sprayed urethane foam), the construction of confidential theme, and the plumbing of the toilet.

Introducing the construction of a 24-hour ventilation system with forced exhaust using exposed piping (silver), ductless intake, and Daikin ducts, which is a standard for renovations│Renovated RC building in Yamanashi and sent to a sewing factory

We will purchase a 40-year-old used property, renovate the parking lot and storage space, and create a sewing factory. This article will introduce you to the process of constructing a wall from scratch. This is an extremely important aspect that affects whether or not the environment is comfortable to work in, as it affects high airtightness and high insulation, such as the erection of foundations, sashes, windows, doors, and moisture-permeable waterproof sheets.